Хладостойкость и сопротивляемость слоистому разрушению сварных соединений стали 06ГБ-390
Завантаження...
Дата
Назва журналу
Номер ISSN
Назва тому
Видавець
Інститут електрозварювання ім. Є.О. Патона НАН України
Анотація
Приведены результаты исследований сопротивляемости стали 06ГБ-390 слоисто-вязким и слоисто-хрупким разрушениям, а также оценки ударной вязкости (КСV–40) металла швов и ЗТВ стыковых соединений данной стали (после сварки и после их термической обработки). Сварку соединений выполняли в свободном и жесткозакрепленном состоянии. Показано, что сталь 06ГБ-390 не склонна к слоисто-вязким и слоисто-хрупким разрушениям, а ударная вязкость металла швов и ЗТВ стыковых соединений во всех случаях практически не изменяется.
The paper presents the results of investigation of resistance of 06GB-390 steel to lamellar-tough and lamellar-brittle fractures, as well as assessment of impact toughness (KCV–40) of weld metal and HAZ of butt joints of this steel (as-welded and after their heat treatment). Joints were welded in an unrestrained and rigidly restrained state. It is shown that 06GB-390 steel is not prone to lamellar-tough and lamellar-brittle fractures, while impact toughness of the metal of weld and HAZ of butt joints does not change practically in any of the cases.
The paper presents the results of investigation of resistance of 06GB-390 steel to lamellar-tough and lamellar-brittle fractures, as well as assessment of impact toughness (KCV–40) of weld metal and HAZ of butt joints of this steel (as-welded and after their heat treatment). Joints were welded in an unrestrained and rigidly restrained state. It is shown that 06GB-390 steel is not prone to lamellar-tough and lamellar-brittle fractures, while impact toughness of the metal of weld and HAZ of butt joints does not change practically in any of the cases.
Опис
Теми
Производственный раздел
Цитування
Хладостойкость и сопротивляемость слоистому разрушению сварных соединений стали 06ГБ-390 / В.Д. Позняков, А.Ю. Барвинко, Ю.П. барвинко, А.Г. Синеок, А.Н. Яшник // Автоматическая сварка. — 2012. — № 3 (707). — С. 45-49. — Бібліогр.: 14 назв. — рос.