Математическая модель дуговой плазмы, генерируемой плазмотроном с проволокой-анодом
Завантаження...
Дата
Назва журналу
Номер ISSN
Назва тому
Видавець
Інститут електрозварювання ім. Є.О. Патона НАН України
Анотація
Разработана математическая модель, описывающая турбулентное течение электродуговой плазмы и формирование плазменной струи в условиях плазменно-дугового напыления. На основе численного моделирования проведен детальный анализ влияния режимов работы плазмотрона с проволокой-анодом и условий обдува генерируемой им слаботурбулентной плазменной струи ламинарным потоком газа на электрические характеристики дугового разряда, тепловые и газодинамические характеристики плазменного потока.
The mathematical model has been developed, describing turbulent flow of the electric arc plasma and formation of the plasma jet under conditions of plasma-arc spraying. Detailed analysis of the effect of working parameters of a plasmatron using an anode wire and conditions of blowing of a low-turbulent plasma jet, generated by plasmatron, with a laminar gas flow on electric characteristics of the arc discharge, thermal and gas-dynamic properties of the plasma flow has been conducted on the basis of numerical modelling.
The mathematical model has been developed, describing turbulent flow of the electric arc plasma and formation of the plasma jet under conditions of plasma-arc spraying. Detailed analysis of the effect of working parameters of a plasmatron using an anode wire and conditions of blowing of a low-turbulent plasma jet, generated by plasmatron, with a laminar gas flow on electric characteristics of the arc discharge, thermal and gas-dynamic properties of the plasma flow has been conducted on the basis of numerical modelling.
Опис
Теми
Научно-технический раздел
Цитування
Математическая модель дуговой плазмы, генерируемой плазмотроном с проволокой-анодом / М.Ю. Харламов, И.В. Кривцун, В.Н. Коржик, С.В. Петров, А.И. Демьянов // Автоматическая сварка. — 2007. — № 12 (656). — С. 14-20. — Бібліогр.: 17 назв. — рос.